Part 3: Reseat the Printhead upto three Times If the missing or failed printhead hp 8610 error persists, then move to the next troubleshooting steps.Do not proceed if your printer is idle and silent.Press the power button of the printer if it doesn't turn on by itself.Again connect the power cord to the backside of the printer.Close the access door of the ink cartridge.Ensure that the carriage latch is down.Move the printhead left and right to ensure that the printhead seats properly into the carriage.Place the printhead inside the carriage of the printer and it automatically clicks into its place.Part 2: Reseat the Printhead and Low Down the Carriage Latch

Hold the sides of the printhead and lift it without removing it from the carriage.Warning: Plug out the power cable connected to the printer and avoid the risk of any electric shock. It is important to unplug the printer as it prevents the carriage from moving.Remove the power cable from the backside of the printer.Do not proceed until the carriage is idle and silent. Take your fingers inside the door and open the carriage to the left side of the printer.Important: Do not remove the printhead from its carriage. You can follow the given steps to reseat the printhead. Solution 2: Reseat the HP Printer Printhead If you find the issue still exists, jump to the next solution. If these steps successfully resolve the missing or failed printhead hp 8610 error, you can stop the troubleshooting process here.Do not perform any action and wait until the printer is idle and silent.Manually turn on the printer, if it does not turns on automatically.Again, connect the power cord to the backside of the printer.NOTE: HP always recommends connecting the power cord of the printer directly to the power source outlet. Step 6: Plug the power cord back again into the source outlet. Step 4: Take out the power cord from the source outlet at the wall. Step 3: Disconnect the power cord from the backside of the printer when the printer is turned on. Step 2: Wait, don't take any action if the printer is idle and silent before you continue. Step 1: Switch on your printer if not already on. To resolve the missing or failed printhead hp 8610 error, follow the given steps and reset the printing mechanism. Have you installed the printhead for the first time and facing an error? This blog is the complete guide to resolving the missing or failed printhead hp 8610 error.

Posted on | HP Printer Support How to Resolve 'Missing or Failed Printhead hp 8610' Error For HP OfficeJet printers?

Hp 8610 printhead installation